1×8 Fiber PLC Splitter, ABS Box Type, SinglemodePlanar lightwave circuit (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology to distribute optical signals from Central Office (CO) to multiple premise locations.Pigtailed ABS splitter is most commonly used in the PON networks. It provides the complete protection for inner optical components and cable, as well as designed for the convenient and reliable installation, but its volume is relatively large. It's mainly used for various connection and distribution products or network cabinets.FeaturesApplicationConfiguration Type: 1× 8, SC/APC connectorOptical Signal Distribution3.0mm ITU G.657A1 for fiber input/outputData CommunicationsLow insertion loss = 10.7dBLan and CATV SystemLow polarization dependent loss (PDL) = 0.3dBFTTX DeploymentOperating bandwidth: 1260 - 1650nmFTTH NetworkCompact design, suitable for installation in optical equipmentsPassive Optical Networks (PON)Wide Operating Temperature: -40 - 85°C, support industry standard applicationsMeasuring System and Laser SystemHigh reliability and stability, Telecordia GR-1221/1209 compliantDWDM and CWDM SystemsTelcordia 1209 & 1221 Test ResultsName of the testConditionDurationTemperature- Humidity aging85°C and 85% RH7 daysVibration10 - 55Hz, 1.52mm double amplitude, in three axes1 hourComponent ImpactTest Impact of 500g (mass = 0.125kg), 1ms , half sine pulse2 impactsTemperature Cycling Test-40 - 70°C, Ramp rate: 1°C /min, Dwell time > 15min10 cyclesTemperature- Humidity cycling-40 - 85°C , between 10°C and 23°C - 85% RH, at 85°C - 20%RH,between °C and 85°C - maintain a linear change in RH,below 10°C - uncontrolled RH14 daysWater Immersion43 ± 2°C , PH 5.5 ± 0.57 daysFiber Side Pull test0.23 kg load, 90° angle , 2 directions5 secondsFiber Side Pull test0.45 Kg load for Single Input Fiber, 1.5 Kg load for 8 Fiber Ribbon Outputs5 secondsCompact design, suitable for installation in outdoor fiber distribution boxThe ABS PLC splitter supports the protection for inner componnents, it is suitable for reliable installation in your system design and manufacturing. Many of our OEM customers in the FTTH, FTTX, PON, GOPN prefer to use the ABS PLC splitter together with outdoor fiber distribution box.