Curing: Surface to be painted must be allowed to cure completely. it is recommended to allow 28 days as the curing time for new masonary surfaces. Cleaning: surface should be free from any loose paint, dust, or grease. Growth of fungus, Algae or moss should be removed by wire brushing and water. In case area has excessive dampness, use Glossy Crete to limit further Dampness. Filling of Cracks: In case of dents and holes use Glossy Homecare Acrylic Wall Putty/Glossy Homecare Powder Putty With White Cement and Fine Sand in the ratio of 1:3 Application: Sanding: Sand the surface thoroughly with sand paper of 180 grade and wipe clean. Priming: Apply one coat of water based Glossy Cement Primer (For repainting) or Solvent based Cement primer (for new surface) & let it dry. Putty: Apply Glossy Acrylic Wall Putty/Glossy Homecare Powder Putty with a putty knife & let it dry. Priming: Apply second coat of Glossy Cement Primer Water based or Solvent based & let it dry. Sanding: Sand the surface again to achieve desired smoothness with sand paper of 320 grade and wipe clean. Top Coat: Apply first coat of Glossy Paints Premium Acrylic Interior Wall Paint after diluting it with required amount of water (Not more than 30%). Let it dry for 3-4 hours Apply second coat* of Glossy Paints Premium Acrylic Interior Wall Paints after diluting it with required amount of water & straining and let it dry for 3-4 hours. *Recoat period suggested for 25 C and 50% relative humidity,these may vary under different weather conditions.